Changing a fuse

WARNINGS:
Do not modify the electrical system of your vehicle in any way. Have repairs to the electrical system and the replacement of relays and high current fuses carried out by a properly trained technician.

Switch the ignition and all electrical equipment off before touching or attempting to change a fuse.

CAUTION:
Fit a replacement fuse with the same rating as the one you have removed.

Note: You can identify a blown fuse by a break in the filament.

Note: All fuses, except high current fuses, are a push fit.

Note: A fuse puller is located in the engine compartment fuse box.

    See also:

    Transmission code designations
    You can find a transmission code on the Safety Compliance Certification Label. The following table tells you which transmission each code represents. ...

    Sump - removal and refitting
    Note: A new gasket and new sump bolts must be used when refitting, and suitable sealant will be required (available from a Ford dealer). Note that it is preferable to keep the engine upright until ...

    Diagram 3a. Additional ancillary circuits (high series only). Models up to 1987
    Diagram 3a. Additional ancillary circuits (high series only). Models up to 1987 ...