Ford Focus

Ford Focus

Ford Focus

See also:

Distributor (OHC models) - removal and refitting
Note: During production the engine ignition timing is accurately set using a microwave process, and sealant is applied to the distributor clamp bolt. Removal of the distributor should be avoided e ...

Driveshaft check (Every 12 000 miles or 12 months)
1 Carry out a thorough inspection of the driveshafts and joints as follows. 2 Jack up the front of the car and support it securely on axle stands (see Jacking and Vehicle Support). 3 Slowly rot ...

Starting a petrol engine - E85
For general information on starting a petrol engine. See Starting a petrol engine. Starting at low ambient temperatures When the temperature is lower than -10C (14F) and the vehicle is filled ...