Opening and closing the bonnet

Opening the bonnet
Opening the bonnet

1. Pull the lever.

2. Raise the bonnet slightly and pull the


2. Raise the bonnet slightly and pull the catch towards you.

3. Open the bonnet and support it with


3. Open the bonnet and support it with the strut.

Closing the bonnet

Note: Make sure that the bonnet is closed properly.

Lower the bonnet and allow it to drop from under its own weight for the last 20 Ц 30 centimetres.

    See also:

    How your vehicle differs from other vehicles
    Truck and utility vehicles can differ from some other vehicles. Your vehicle may be higher to allow it to travel over rough terrain without getting hung up or damaging underbody components. The d ...

    Front suspension lower arm (forged type) - removal, overhaul and refitting
    1 The forged type suspension arm is fitted to all models except pre-May 1983 1.1 litre versions. Removal 2 Jack up the front of the car and support it on stands (see УJacking and Vehicle SupportФ ...

    Engine/automatic transmission assembly - reconnection and refitting
    1 Reverse the procedure described in paragraphs 1 to 25 of Section 8, noting the following points. 2 Check that the engine adapter plate is correctly positioned on its locating dowels. If necessa ...