Child seat positioning

Child seat positions

WARNINGS:
For rearward facing child restraints in the front passenger seat, the front passenger
airbag must be switched OFF.

When using a child seat with a seat belt, make sure that the seat belt is not slack
or twisted.

Note: For rearward facing child restraints in the front passenger seat, the seat must
be adjusted to the rearmost position with the seatback fully upright.

L Suitable only for the following child restraints: Roemer Baby-SafeL Suitable only for the following child restraints: Roemer Baby-Safe


L Suitable only for the following child restraints: Roemer Baby-Safe (E1-04301146),
Roemer Baby-Safe Plus (E1-04301146), Roemer Duo (E1-04301133), Roemer Duo Plus (E1-04301133) and Roemer KID (E1-04301148). However, we recommend that you secure children in a government approved child restraint, in the rear seat.

U Suitable for universal category child restraints approved for use in this mass group.

X Not suitable for children in this mass group.

U1 Suitable for universal category child restraints approved for use in this mass group.

However, we recommend that you secure children in a government approved child restraint, in the rear seat.

    See also:

    Air cleaner - removal and refitting
    2.0 litre SOHC models 1 Disconnect the battery negative lead. 2 Depress the locking clip on the airflow meter wiring plug and disconnect the plug. Pull on the plug, not the wiring. 3 Loosen the s ...

    Air Charge Temperature (ACT) sensor - removal and refitting
    Removal 1 The ACT sensor is screwed into the CFI unit. 2 Disconnect the battery negative lead. 3 Remove the air cleaner assembly. 4 Disconnect the ACT sensor wiring plug (see illustration). 1 ...

    Using the telephone - Vehicles With: Navigation System
    This chapter describes the phone functions of the Navigation System. Note: Refer to your Navigation System guide for details of the controls. An active phone must be present. Even if connected to ...