Fastening the seat belts

WARNING:
Insert the tongue into the buckle until you hear a distinct click. You have not fastened the seat belt properly if you do not hear a click.


Pull the belt out steadily. It may lock if you


Pull the belt out steadily. It may lock if you pull it sharply or if the vehicle is on a slope.

Press the red button on the buckle to release the belt. Let it retract completely and smoothly.

    See also:

    Electrical system
    The body electrical system consists of all lights, wash/wipe equipment, interior electrical equipment, and associated switches and wiring. ...

    Fuel tank - removal and refitting
    Note: Refer to the warning at the end of Section 1 before proceeding. Removal 1 The fuel tank will normally only need to be removed if it is severely contaminated with sediment or other substance ...

    Checking the wiper blades
    Checking the wiper blades Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blade lips with water applied with a soft sponge. ...