Engine coolant check

Checking the coolant level
Checking the coolant level

CAUTION:
Make sure that the coolant level is between the MIN and the MAX marks.

Note: Coolant expands when it is hot.

The level may therefore extend beyond the MAX mark.

Topping up the coolant

WARNING:
Do not remove the coolant reservoir cap when the engine is hot. Wait for the engine to cool down.

Unscrew the cap slowly. Any pressure will escape slowly as you unscrew the cap.

WARNINGS:
Only add coolant when the engine is cold. If the engine is hot, wait 10 minutes for the engine to cool down.

Do not allow coolant to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor.

CAUTION:
Do not spill coolant on any part of the engine.

Only add coolant that meets the Ford specification. See Technical specifications.

    See also:

    General information on radio frequencies
    CAUTION: The radio frequency used by your remote control can also be used by other short distance radio transmissions (e.g. amateur radios, medical equipment, wireless headphones, remote control ...

    Exhaust pressure transducer (1.8 litre (R6A type) CVH) - removal and refitting
    1 The EPT unit is located on the right-hand side of the engine, behind the CFI unit (see illustration). 32.1 Exhaust pressure transducer attachments - 1.8 litre (R6A) CVH A Exhaust pressure tran ...

    Engine coolant check
    Checking the coolant level WARNING: Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. CAUTION ...