General information

WARNING:
Do not operate the information display controls when the vehicle is moving.

Note: The information display will remain on for several minutes after you switch off the ignition.

Various systems on your vehicle can be controlled using the multi-function lever on the steering column. Corresponding information is displayed in the information display.

For detailed instructions on navigation, refer to the appropriate manual.

Controls
Controls

Use the rotary control:

Type 2 and 3

Х to scroll through the trip computer displays.

Х to scroll through and highlight the options within a menu.

Note: To scroll automatically, hold the rotary control in the upward or downward position.

Press the SET/RESET button to:


Press the SET/RESET button to: Х enter the main menu from the trip computer displays.

Х enter a sub-menu.

Х exit a menu.

Х choose and confirm a setting.

Note: If the chimes are activated, a short tone will sound each time the button is pressed.

Menu structure


Trip computerTrip computer


    See also:

    Centre console - removal and refitting
    Models up to 1990 Full length console 1 Where applicable, prise the electric window switches from the front upper console panel and disconnect the wiring. 2 Remove the three securing screws from ...

    Major operations requiring engine removal
    The following operation can only be carried out after removing the engine from the vehicle: a) Removal of the crankshaft and main bearings. ...

    Adjusting the windscreen washer jets
    1. Open the bonnet. See Opening and closing the bonnet. 2. Using a suitable implement adjust the jets. 3. Close the bonnet and check the operation of the jets. See Opening and closing the bonn ...