Trip computer

Type 2 and 3

Odometer

Registers the total mileage of the vehicle.

Tripmeter

Registers the mileage of individual journeys.

Distance to empty

Indicates the approximate distance the vehicle will travel on the fuel remaining in the tank. Changes in driving pattern may cause the value to vary.

Instantaneous fuel consumption

Indicates the current average fuel consumption.

Average fuel consumption

Indicates the average fuel consumption since the function was last reset.

Average speed

Indicates the average speed calculated since the function was last reset.

Outside air temperature

Shows the outside air temperature.

Hold 'SET' to set Tyre Pres.

Recalibrates the system to the actual pressure of the tyres. See Tyre pressure monitoring system.

Menu

Enters the main menu. See General information.

Trip computer A
Trip computer A
Odometer B
Tripmeter C

The trip computer includes the following information displays:

Turn the rotary control to scroll through


Turn the rotary control to scroll through the trip computer displays.

Note: The position of the trip computer display may vary depending on the information shown in the display.

Resetting the trip computer using the main menu

To reset a particular display: 1. Turn the rotary control and highlight Menu.

2. Press the SET/RESET button.

3. Highlight "Reset Trip".

4. Press the SET/RESET button.

5. Highlight the function to be reset.

6. Press and hold the SET/RESET button.

    See also:

    Oil filler cap check (Every 6000 miles (10 000 km) or 6 months)
    Remove and clean the oil filler cap of any sludge build-up using paraffin. Inspect the vent hose for blockage or damage. A blocked hose can cause a buildup of crankcase pressure, which in turn can ...

    Refuelling
    CAUTION: Do not attempt to start the engine if you have filled the fuel tank with the incorrect fuel. This could damage the engine. Have the system checked by a properly trained technician immedi ...

    Starter motor - brush renewal
    Bosch long frame and JF, and Cajavec types 1 With the starter motor removed from the vehicle and cleaned, grip the unit in a vice fitted with soft jaw protectors. 2 Remove the two screws securing ...