Satellite navigation unit holder

Fitting the navigation unit
Fitting the navigation unit

Insert the navigation unit into the holder until you hear a distinct click.

Adjusting the holder
Adjusting the holder

1. Unlock.

2. Adjust the holder to the desired position.

3. Lock.

Note: Make sure that the navigation unit holder is locked in position.

Removing the navigation unit
Removing the navigation unit

    See also:

    Specifications
    Fuel evaporative emission control system - carburettor engines Ported vacuum switch operating temperature: Two-port valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

    Handbrake cables - renewal
    1 Chock the front wheels, then fully release the handbrake. 2 Raise and support the vehicle at the rear with axle stands (see “Jacking and Vehicle Support”). Primary cable 3 Extract the spring c ...

    Inner gutter weatherstrip (Saloon, Hatchback and Estate models) - removal and refitting
    Removal 1 Open both the front and rear doors to expose the relevant weatherstrip. 2 Carefully pull the weatherstrip from the base of the front pillar, taking care to release the flap which is stu ...