Refuelling

CAUTION:
Do not attempt to start the engine if you have filled the fuel tank with the incorrect fuel. This could damage the engine. Have the system checked by a properly trained technician immediately.

    See also:

    Temperature gauge sender unit - removal and refitting
    Note: Suitable jointing compound will be required on refitting. Removal 1 With the engine cold unscrew the pressure cap on the thermostat housing or expansion tank as applicable, then refit it. T ...

    Charge air temperature sensor - removal and refitting
    Removal 1 The charge air temperature sensor is only used on KE-Jetronic systems and is located in the air inlet duct (see illustration). 17.1 Charge air temperature sensor location (arrowed) 2 ...

    Programming the remote control
    A maximum of eight remote controls (including any supplied with your vehicle) can be programmed. The remote controls must remain inside the vehicle during the programming procedure. Fasten the fro ...