Using stability control

Note: The system will be switched on automatically every time you switch the ignition on.

Vehicles with stability control (ESP) switch

Note: On Focus RS, stability control (ESP) is only reduced and not switched off completely.

Press and hold the switch for one second.

The switch will illuminate. A message will be shown in the display. See Information messages.

Press the switch again to turn the system on.

For item location: See Quick start.

Vehicles without stability control (ESP) switch

To turn the system off and on. See Information displays.

    See also:

    Waste gate solenoid control valve - removal and refitting
    Removal 1 The solenoid control valve is mounted on a bracket located underneath the ignition distributor (see illustration). 21.1 Waste gate solenoid control valve location (arrowed) 2 Disconne ...

    Global opening and closing
    You can also operate the electric windows with the ignition off via the global opening and global closing function. Note: Global closing will only operate if you have set the memory correctly for ...

    Carburettor (Weber 2V type) - fast idle speed adjustment
    1 This procedure does not apply to models fitted with a carburettor stepper motor, for which no adjustment is possible. 2 Check the idle speed and mixture. The idle speed must be correct before at ...