Principle of operation

The camera is a visual aid for use when reversing.

WARNING:
The camera does not relieve you of your responsibility to drive with due care and attention.

CAUTIONS:
If you use a high pressure spray to wash your vehicle, only spray the camera briefly from a distance not less than 20 centimetres (8 inches).

Do not apply pressure to the camera.

The position and the angle of the camera automatically changes.

Note: Keep the camera free from dirt, ice and snow. Do not clean with sharp objects, degreaser, wax or organic products. Use only a soft cloth.

During operation, guide lines appear in the display which represent your vehicle's path and approximate distance from rearward objects.

    See also:

    Front suspension strut - removal, overhaul and refitting
    Note: A spring compressor tool will be required if the strut is to be dismantled. Removal 1 Loosen the relevant front roadwheel nuts, apply the handbrake, jack up the front of the vehicle and sup ...

    Waxing
    Х Wash the vehicle first. Х Use a quality wax that does not contain abrasives. Х Do not allow paint sealant to come in contact with any non-body (low-gloss black) colored trim, such as grained door ...

    Pistons/connecting rods - removal and refitting
    Removal 1 Remove the sump, as described in Section 8, and the cylinder head, as described in Section 7. 2 Check that the connecting rod and cap have adjacent numbers at their big-end to indicate ...