Technical specifications

Vehicle fluids

1 Providing it meets the specification defined by WSS-M2C913-C, you can also1 Providing it meets the specification defined by WSS-M2C913-C, you can also


1 Providing it meets the specification defined by WSS-M2C913-C, you can also use
Ford Engine Oil or an alternative engine oil.

2 On vehicles with a 2.5L Duratec-RS engine, use only this oil.

Topping up the oil: If you are unable to find an oil that meets the specification defined
by WSS-M2C913-C, you must use SAE 5W-30 (preferred), SAE 5W-40 (except vehicles with E85 fuel) or SAE 10W-40 that meets the specification defined by either
ACEA A5/B5 (preferred) or ACEA A3/B3. Using these oils can result in longer engine
cranking periods, reduced engine performance, reduced fuel economy and increased emission levels.

Castrol engine oil recommended.

Capacities


Capacities

Vehicle careVehicle careVehicle care


    See also:

    Audio control
    Volume up A Seek up B Volume down C Seek down D Mode E Mode Press and hold the mode button to select the audio source. Press the mode button to: • tune the radio to the next preset station. ...

    Major operations requiring engine removal
    The following operation can only be carried out after removing the engine from the vehicle: a) Removal of the crankshaft and main bearings. ...

    Exterior rear pillar trim panel (Saloon models) - renewal
    1 Remove the interior rear pillar trim panel. 2 Unscrew the three now exposed securing nuts and withdraw the exterior trim panel (see illustration). 34.2 Exterior rear pillar trim panel securing ...