Using voice control

System operation

The order and content of the voice controls are given in the following lists. The tables show the sequence of user voice commands and system responses for each available function.

< > indicates a number or stored name tag to be inserted by the user.

Short cuts

There are a number of voice command short cuts available, which allow you to control some vehicle features without having to follow the complete command menu. These are:

Х phone: "MOBILE NAME", "DIAL NUMBER", "DIAL NAME", and "REDIAL".

Х CD player/CD changer: "DISC" and "TRACK".

Х automatic climate control: "TEMPERATURE", "AUTO MODE", "DEFROSTING/DEMISTING ON" and "DEFROSTING/DEMISTING OFF".

Х radio: "TUNE NAME".

Х external device (USB): "TRACK".

Х external device (iPod): "TRACK".

Х SD card: "TRACK".

Start communicating with the system

Before you can start talking to the system you first have to press the VOICE or MODE button for each operation and wait until the system answers with a beep.

See Voice control.

Press the button again to cancel the voice session.

Name tag

The name tag functionality can support the phone, audio and navigation features by using the "STORE NAME" function. You can assign name tags to items such as favourite radio stations and personal phone contacts. See Audio unit commands. See Telephone
commands. See
Navigation system commands Х Store up to 20 name tags per function.

Х The average recording time for each name tag is approximately 2-3 seconds.

    See also:

    Replacing headlamp bulbs
    1. Make sure the headlamp control is in the off position. 2. Open the hood. 3. Reach over the front bolster. 4. Remove the bulb by turning it counterclockwise and then pulling it straight out. ...

    Engine/transmission - reconnection and installation
    1 This is a direct reversal of removal and separation from the transmission. Take care not to damage the radiator or front wings during installation. Reconnection 2 Make sure that the engine adap ...

    Front direction indicator side repeater lamp - removal and refitting
    1 Disconnect the battery negative lead. Models up to 1987 2 To improve access, turn the steering onto full lock. 3 Remove the relevant wheel arch liner. 4 Working under the wheel arch, depress th ...