Road Safety

WARNINGS:
The system provides you with information designed to help you reach your destination quickly and safely.

For reasons of safety, the driver should only program the system when the vehicle is stationary.

The system provides no assistance with respect to stop signs, traffic lights, areas under construction or other important safety information.

Do not use the system until you have familiarised yourself with its operation.

Only view the system display when driving conditions permit.

Safety information

Read and follow all stated safety precautions. Failure to do so may increase your risk of collision and personal injury.

Ford Motor Company shall not be liable for any damages of any type arising from failure to follow these guidelines.

If detailed viewing of route instructions is necessary, pull off the road when it is safe to do so and park your vehicle.

Do not use the navigation system to locate emergency services.

To use the system as effectively and safely as possible, always use the latest navigation information. Your dealer will be able to assist with this.

    See also:

    Using hill start assist
    The system can operate in either automatic or manual mode. If you select automatic mode, the system is activated automatically when the vehicle is on a slope and you press the brake pedal. If you ...

    Air cleaner - removal and refitting
    2.0 litre SOHC models 1 Disconnect the battery negative lead. 2 Depress the locking clip on the airflow meter wiring plug and disconnect the plug. Pull on the plug, not the wiring. 3 Loosen the s ...

    Master cylinder - removal, overhaul and refitting
    Note: Before starting work, refer to the warning at the beginning of Section 3 concerning the dangers of hydraulic fluid. Removal 1 Disconnect the leads from the level warning switch in the reser ...