This chapter describes the phone functions of the audio unit.

Note: Refer to your audio guide for details of the controls.

An active phone must be present.

Even if connected to the audio unit, your phone can still be used in the usual way.

Note: You can exit the phone menu by pressing any source button CD, AM/FM or AUX.

Making a call

Dialling a number

You can access your phone address book either with the phone docked in the cradle or via Bluetooth. The entries will appear in the audio unit display.

1. Press the PHONE or the call accept button.

2. Press the MENU button.

3. Keep pressing the MENU button until PHONEBOOK appears.

4. Press the seek buttons to select the desired phone number.

Note: Press and hold the seek button to skip to the next letter in the alphabet.

5. Press the PHONE or the call accept button to dial the selected phone number.

If you have an audio unit with a telephone keypad (buttons 0-9, * and #), you can also direct dial by entering the number on the radio display via the keypad and pressing the call accept button: 1. Press the call accept button.

2. Dial the number using the telephone keypad on the audio unit.

3. Press the call accept button.

Note: If you enter an incorrect digit whilst entering a phone number, press the seek down button to erase the last digit. A long press will erase the complete string of digits.

Press and hold 0 to enter a + digit.

Ending a call

Calls can be ended by either: • pressing one of the following buttons on the audio unit: PHONE, CD, AM/FM or ON/OFF
• pressing the MODE button on the remote control
• pressing the call reject button.

Note: If you have an audio unit with a telephone keypad you can end a call only with the call reject button.

Redialling a number

1. Press the PHONE or the call accept button.

2. Press the MENU button.

3. Select the CALL OUT list or the CALL IN list.

Note: If the active phone does not provide a call out list, the last outgoing call number/entry is displayed.

4. Press the seek button on the audio unit.

5. Press the PHONE or the call accept button to dial the desired phone number.

Redialling the last dialled number

Note: This applies to only audio units with a telephone keypad

1. Press the call accept button.

2. Press the call accept button again to display the last dialled number.

3. Press the call accept button a third time to dial the number.

Receiving an incoming call

Accepting an incoming call

Incoming calls can be accepted by either: • pressing the PHONE button.

• pressing the MODE button on the remote control.

• pressing the call accept button.

Rejecting an incoming call

Incoming calls can be rejected by either: • pressing the call reject button.

• pressing the CD button.

• pressing the AM/FM button.

Note: If you have an audio unit with a telephone keypad you can only reject a call with the call reject button.

Note: You cannot reject an incoming call using the remote control.

Handling a second incoming call

Note: The second incoming call function must be activated in your phone.

If there is an incoming call whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call.

Accepting a second incoming call

Second incoming calls can be accepted by either:
• pressing the call accept button.

• pressing the MODE button on the remote control.

• pressing the PHONE button.

Note: This will cancel the ongoing call.

Rejecting a second incoming call

Second incoming calls can be rejected by pressing either:
• pressing the call reject button.

• pressing the CD button.

• pressing the AM/FM button.

Note: If you have an audio unit with a telephone keypad you can only reject a call with the call reject button.

Changing the active phone

Note: Phones must be bonded to the system before they can be made active.

Using the station storage button

1. Press the PHONE button on the audio unit.

2. Press the preset number required (using the station preset buttons 1 - 6).

Note: This process is only for audio units without a telephone keypad.

Using the audio unit menu

1. Press the PHONE or call accept button.

2. Press the MENU button on the audio unit.

3. Select the ACTIVE PHONE option on the audio unit.

4. Scroll through the different stored phones by using the seek buttons to display the bonded phones.

5. Press the MENU button to select the phone which is to be the active phone.

Note: After bonding a Bluetooth phone to the system, this becomes the active phone.

Debonding a bonded phone

A bonded phone can be deleted from the system at any time, unless a phone call is in progress.

1. Press the PHONE or call accept button.

2. Press the MENU button on the audio unit.

3. Select the DEBOND option on the audio unit.

4. Scroll through the different phones by using the seek buttons and display the phone to be debonded.

5. Press the MENU button to select the phone which is to be debonded.