Child seat positioning

WARNINGS:
When using a child restraint with a support leg on a second row seat, make sure the support leg rests securely on the floor.

When using a forward facing child seat on a second row seat, always remove the head restraint from that seat.

When fitting a child seat using the vehicle seat belts make sure the belts are not slack.

Note: When using a child restraint on a front seat, it may prove difficult to tighten the lap section of the seat belt without slack remaining. If this is the case, adjust the seatback to the fully upright position and raise the height of the seat. See Seats.

X Not suitable for children in this mass group.


X Not suitable for children in this mass group.

U Suitable for universal category child restraints approved for use in this mass group.

U¹ Suitable for universal category child restraints approved for use in this mass group.

However, we recommend that you secure children in a government approved child restraint, in the rear seat.

UF¹ Suitable for universal category forward facing child restraints approved for use in
this mass group. However, we recommend that you secure children in a government approved child restraint, in the rear seat.

ISOFIX child restraints

IUF Suitable for universal category ISOFIX child restraints approved for use


IUF Suitable for universal category ISOFIX child restraints approved for use in this mass
group.

IL Suitable for the following ISOFIX child restraints: Roemer Duo ISOFIX (group 1), Roemer
Babysafe ISOFIX (group 0+). In addition, any semi-universal ISOFIX child restraint may
be used if indicated in the child seat manufacturers vehicle list.

* As defined by ECE-R16.

Note: ** When you are purchasing an ISOFIX restraint, make sure that you know the
correct mass group and ISOFIX size class for the intended seating locations.

Note: ** Make sure that the top tether mechanism does not interfere with the luggage
cover.

    See also:

    Connecting an external device - Vehicles With: Bluetooth
    Connecting a Bluetooth audio device CAUTION: As various standards exist, manufacturers are able to implement a variety of profiles in their Bluetooth devices. Because of this, an incompatibilit ...

    Throttle pedal - removal and refitting
    Removal 1 Disconnect the battery negative lead. 2 Remove the lower facia panel from the driver’s side. 3 Prise off the securing clip and disconnect the end of the throttle cable from the top of ...

    Hazard warning flashers
    Note: Depending on applicable laws and regulations in the country for which your vehicle was originally built, the hazard warning flashers may flash if you brake heavily. For item location: See ...