Clock

Note: Some navigation systems will automatically set the date and time on the clock using GPS signals.

Note: See General information.

1. From the main menu, select the clock function.

2. Select the option required.

3. Press OK.

4. Using the right, left, up and down arrow buttons, select and change the value.

5. Press OK.

    See also:

    Engine compartment overview - 2.5L Duratec-RS (VI5)
    A. Screen washer fluid reservoir*: See Washer fluid check. B. Engine coolant reservoir*: See Engine coolant check. C. Brake and clutch fluid reservoir (right-hand drive)*: See Brake and clutch f ...

    Pistons and connecting rods - removal and refitting
    1.8 litre (R2A type) Removal 1 With the engine removed from the vehicle, remove the sump and the cylinder head. 2 Check the big-end caps for identification marks and if necessary use a centre-pun ...

    General information and precautions
    Contact breaker ignition system The ignition system is divided into two circuits, low tension (primary) and high tension (secondary). The low tension circuit consists of the battery, ignition swit ...