Auxiliary power sockets
CAUTION:
If you use the socket when the
engine is not running, the battery
may discharge.
Note: You can use the socket when the ignition is switched off.
Note: You can use the socket to power 12 volt appliances that have a maximum current rating of 15 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets.
Auxiliary power sockets
See also:
Checking the wiper blades
Checking the wiper blades
Run the tip of your fingers over the edge
of the blade to check for roughness.
Clean the wiper blade lips with water
applied with a soft sponge. ...
Engine/transmission - reconnection and installation
1 This is a direct reversal of removal and
separation from the transmission. Take care
not to damage the radiator or front wings
during installation.
Reconnection
2 Make sure that the engine adap ...
Rear suspension and final drive unit assembly (Saloon, Hatchback and Estate
models) - removal and refitting
Note: From May 1986, revised final drive unit
rear mounting bolts have been used in
production. Whenever the earlier type of bolts
are removed, they should be discarded and
the later type fitted. ...