Parking brake

Applying the parking brake
Applying the parking brake

WARNING:
Make sure that the parking brake is applied before you release the lever.

Note: Do not press the release button when you apply the parking brake.

1. Press the brake pedal firmly.

2. Pull the parking brake lever upwards to its fullest extent.

Parking on a hill

If you have to park facing uphill, select first gear and turn the front wheels away from the kerb. If you have to park facing downhill, select reverse gear and turn the front wheels towards the kerb.

Releasing the parking brake

1. Press the brake pedal firmly.

2. Pull the parking brake lever upwards slightly, press the release button and push the lever downwards.

    See also:

    Carburettor (Weber 2V TLD) - removal and refitting
    Caution: Refer to the precautions in Section 1 before proceeding. Note: A new gasket must be used when refitting the carburettor. A tachometer and an exhaust gas analyser will be required to chec ...

    Catalytic converter
    WARNING: Do not park or idle your vehicle over dry leaves, dry grass or other combustible materials. The exhaust will radiate a considerable amount of heat during use, and after you have switched ...

    Glasses holder
    Glasses holder ...