Using stability control

Press and hold the switch for one second.


Press and hold the switch for one second.

The switch will illuminate. A message will be shown in the display. See Information messages.

Press the switch again to turn the system on. The system will be switched on automatically every time you switch the ignition on.

You can switch the system on and off via the information display menu. See Information displays.

    See also:

    Body electrical system
    The electrical system is of the 12 volt. negative earth type. Electricity is generated by an alternator, belt-driven from the crankshaft pulley. A lead-acid storage battery provides a reserve of p ...

    Using a USB device
    Various icons are used to identify types of audio file, folders etc. USB device is the active source Folder Playlist Album Artist Filename Track title Information not availabl ...

    Contact breaker points adjustment - models with contact breaker distributor (Every 6000 miles or 6 months)
    1 Spring back the retaining clips or undo the screws as appropriate and lift off the distributor cap. 2 Withdraw the rotor arm from the distributor shaft. 3 Using a screwdriver, gently prise the ...