Using active suspension

Selecting a setting

Note: After you select a setting, you may not immediately notice a difference in the vehicle's handling. The effect of the continuously controlled damping depends on the road surface and driving conditions.

You can change the setting while driving.

You can change the setting while driving.

System malfunction

The active suspension system will switch off automatically if it malfunctions. The suspension will be set to a fail-safe condition that will enable you to continue driving but you will not be able to change the suspension setting. Have this checked as soon as possible.

    See also:

    Fuel tank - removal and refitting
    Caution: Refer to the precautions in Section 1 before proceeding. 1 Run the fuel level as low as possible before removing the tank. 2 Disconnect the battery negative lead. 3 Remove the tank fill ...

    Heater unit - overhaul
    1 With the heater unit removed from the vehicle, remove the two securing screws and withdraw the heater matrix from the casing (see illustrations). 19.1a Remove the securing screws . . . 19.1 ...

    Disarming the alarm
    Disarm and silence the alarm by unlocking either of the front doors or luggage compartment with the key. ...