Cargo nets

Luggage retention net

Installing the net

1. Push the ends of the upper bar

1. Push the ends of the upper bar towards each other and insert them into the retainers on the roof. Push the bar forwards into the narrow section of the retainers.

2. Attach the net to the luggage anchor

2. Attach the net to the luggage anchor points. See Luggage anchor points.

3. Tighten the belts.

3. Tighten the belts.

Removing the net

1. Release the belts.

1. Release the belts.

2. Remove the net from the luggage anchor points.

3. Remove the upper bars.

    See also:

    Brake pedal - removal, refitting and adjustment
    Removal 1 Working within the vehicle, remove the under-dash cover panel. 2 Extract the spring clip which connects the pushrod to the arm of the brake pedal. 3 Extract the circlip from the end of ...

    Steering gear - removal, overhaul and refitting
    Removal Note: New tie-rod balljoint split-pins must be used on refitting. 1 Set the front roadwheels in the straightahead position. 2 Raise the front of the vehicle and fit stands (see “Jacking ...

    Heated seats
    CAUTION: Operating this function with the engine off will drain the battery. The seat heating will operate only when the ignition is switched on. The maximum temperature is reached after five ...