Dog guard

CAUTION:
Keep a distance of at least one centimetre between the dog guard and the seats in front of it.

Installing behind the front seats
Installing behind the front seats

1. Push the ends of the bar on the grille towards each other and insert them into the retainers on the roof. Push the bar forwards into the narrow section of the retainers.

2. Attach the dog guard to the lower


2. Attach the dog guard to the lower anchor points. Do not tighten the screws.

3. Attach the grille to the lower bar with


3. Attach the grille to the lower bar with the handwheels. Do not tighten the handwheels.

4. Tighten the screws at the lower anchor points.

5. Tighten the handwheels.

Installing behind the rear seats

1. Push the ends of the bar on the grille


1. Push the ends of the bar on the grille towards each other and insert them into the retainers on the roof. Push the bar forwards into the narrow section of the retainers.

2. Remove two screws from both the


2. Remove two screws from both the luggage anchor points. See Luggage anchor points.

3. Attach the lower bar to the grille with the handwheels. Do not tighten the handwheels.

4. Attach the dog guard lower bar to the luggage anchor points, secure with the new supplied screws.

5. Tighten the handwheels.

Remove in the reverse order.

    See also:

    How your vehicle differs from other vehicles
    SUVs and trucks can differ from some other vehicles in a few noticeable ways. Your vehicle may be: Х Higher Ц to allow higher load carrying capacity and to allow it to travel over rough terrai ...

    Hints on driving with ABS
    When the ABS is operating, the brake pedal will pulse. This is normal. Maintain pressure on the brake pedal. The ABS will not eliminate the dangers inherent when: Х you drive too close to the veh ...

    Regional mode (REG)
    Regional mode (REG) controls the behaviour of AF switching between regionally related networks of a parent broadcaster. A broadcaster may run a fairly large network across a large part of the cou ...