Fuse box locations

Engine compartment fuse box
Engine compartment fuse box

Central fuse box

All vehicles

1. Loosen the screws.


1. Loosen the screws.

2. Turn the knob through 90 degrees and


2. Turn the knob through 90 degrees and release the fuse box from the retaining bracket.

3. Lower the fuse box and pull it towards you.

Vehicles built up to: 07-02-2010

4. Remove the cover to gain access to


4. Remove the cover to gain access to the fuses (vehicles with a cooled glove box).

All vehicles

5. Install in the reverse order.

Rear fuse box - 4-door and 5- door

1. Remove the cover.


1. Remove the cover.

2. Remove the relevant fuse box cover.


2. Remove the relevant fuse box cover.

Rear fuse box - Estate

1. Release the catches.


1. Release the catches.

2. Remove the cover.

3. Remove the relevant fuse box cover.


3. Remove the relevant fuse box cover.

    See also:

    Oil pump - removal and refitting
    Removal 1 Remove the sump. 2 Unscrew the bolt securing the pick-up tube and strainer to the cylinder block (see illustration). 30.2 Unscrewing the oil pick-up tube securing bolt 3 Using a suit ...

    General information
    WARNING: Do not operate the information display controls when the vehicle moving. Note: The information display will remain on for several minutes after you switch off the ignition. Various sys ...

    Specifications
    System type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 volt, negative earth Bulbs Fittings Wattage Halogen headlamps . . . . . . . . . . . . . . . . . ...