Changing a fuse

WARNINGS:
Do not modify the electrical system of your vehicle in any way. Have repairs to the electrical system and the replacement of relays and high current fuses carried out by a properly trained technician.

Switch the ignition and all electrical equipment off before touching or attempting to change a fuse.

CAUTION:
Fit a replacement fuse with the same rating as the one you have removed.

Note: You can identify a blown fuse by a break in the filament.

Note: All fuses, except high current fuses, are a push fit.

Note: A fuse puller is located in the engine compartment fuse box.

    See also:

    Fuel evaporative emission control system components (Central Fuel Injection/CFI engines) - removal and refitting
    Carbon canister Removal 1 The carbon canister is located behind the bumper, under the front right-hand wheelarch (see illustration). 5.1 Carbon canister location (wheelarch liner removed) - CFI ...

    Overhead console - removal and refitting
    Removal 1 Disconnect the battery negative lead. 2 Open the sunroof. 3 On models with a manually-operated sunroof, remove the sunroof handle securing screw, then withdraw the handle and trim plate ...

    Power-operated folding roof components - removal and refitting
    Hydraulic rams Removal 1 Remove the rear wheelhouse covers with reference to Section 32. 2 Mark the two hoses connected to the ram as a guide to reassembly, then remove the circlips securing the ...