Technical specifications

Vehicle fluids

* Providing it meets the specification defined by WSS-M2C913-C, you can also


* Providing it meets the specification defined by WSS-M2C913-C, you can also use
Ford Engine Oil or an alternative engine oil.

Topping up the oil: If you are unable to find an oil that meets the specification defined
by WSS-M2C913-C, you must use SAE 5W-30 (preferred), SAE 5W-40 (except vehicles with E85 fuel) or SAE 10W-40 that meets the specification defined by either
ACEA A5/B5 (preferred) or ACEA A3/B3. Using these oils can result in longer engine
cranking periods, reduced engine performance, reduced fuel economy and increased emission levels.

Castrol engine oil recommended.


Castrol engine oil recommended.

Capacities

Vehicle careVehicle careVehicle care


    See also:

    Engine oil cooler - removal and refitting
    Note: Suitable sealant will be required on refitting - see text. Removal 1 Remove the engine oil filter (Chapter 1). 2 Note the angle at which the coolant hoses are set, then disconnect the hoses ...

    Ford and Lincoln car care products
    Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. These quality products have been specifically engineered to fulfill your a ...

    Engine/transmission mountings - removal and refitting
    Pre-1986 models 1 The engine mountings can be removed if the weight of the engine/transmission is first taken by one of the three following methods. 2 Either support the engine under the sump usi ...