Connecting an external device - Vehicles With: Bluetooth

Connecting a Bluetooth audio device

CAUTION:
As various standards exist, manufacturers are able to implement a variety of profiles in their Bluetooth devices. Because of this, an incompatibility can occur between the Bluetooth device and the system, which in some cases may limit system functionality. To avoid this situation, only recommended devices should be used.

Please visit the website www.ford-mobile-connectivity.com for full details.

Bonding the device

Note: Some audio and navigation units have a separate Bluetooth audio menu.

Use this to access setup and control.

To connect the device to the system follow the same procedure as for Bluetooth hands free phones. See Bluetooth setup.

Operating the device

Select Bluetooth audio as the active source.

Tracks can be accessed by skipping forwards and backwards using the steering wheel controls, or directly from the audio unit controls.

    See also:

    Underbonnet lamp - removal, refitting and bulb renewal
    1 Disconnect the battery negative lead. Removal and refitting 2 Detach the wiring connector at the left-hand bonnet hinge, and attach a length of string to the end of the wire running from the lam ...

    Heated rear window aerial amplifier - removal and refitting
    Removal 1 On some 1986 models onwards the radio aerial is incorporated in the heated rear window element, and to assist reception an amplifier is fitted. This is located in the tailgate adjacent ...

    Ford VV carburettor automatic choke components - removal, checking and refitting
    Bi-metal housing Note: A new gasket will be required on refitting. Removal 1 Disconnect the battery negative lead. 2 Remove the air cleaner as described in Section 2. 3 Release any pressure in ...