Arming the engine immobiliser

The engine immobiliser is armed automatically a short time after you have switched the ignition off.

    See also:

    Crankshaft rear oil seal - renewal
    1 Remove the flywheel/driveplate. 2 Prise out the oil seal. If necessary, drill the outer face of the oil seal and use self-tapping screws and a pair of grips to withdraw the seal (see illustratio ...

    Front fog lamps
    Front fog lamps WARNING Only use the front fog lamps when visibility is considerably restricted by fog, snow or rain. Note: You cannot switch the front fog lamps on if you have switched autola ...

    Fuel pressure regulator - removal and refitting
    Note: Refer to the precautions at the end of Section 1 before proceeding. A new sealing ring will be required on refitting. Removal 1 Disconnect the battery negative lead. 2 Depressurise the fuel ...