Changing the wiper blades

Windscreen wiper blades

CAUTIONS:
Set the windscreen wipers in the service position to change the wiper blades.

You can use the service position in winter to provide easier access to the wiper blades for freeing them from snow and ice. The windscreen wipers will return to their normal position as soon as you switch on the ignition so make sure that you fully defrost the windscreen before you switch on the ignition.

Service position
Service position

1. Turn the ignition switch to position II.


1. Turn the ignition switch to position II.

2. Move the wiper lever to position A and turn the ignition off as soon as the wiper blades have reached the service position.

3. Remove the ignition key.

Changing the windscreen wiper blades

Set the windscreen wipers in the service position and lift the wiper arms.

1. Press the locking button.


1. Press the locking button.

2. Remove the wiper blade.

Note: Make sure that the wiper blade locks into place.

3. Install in the reverse order.

Rear window wiper blade

1. Lift the wiper arm.

2. Position the wiper blade at right angles


2. Position the wiper blade at right angles to the wiper arm.

3. Disengage the wiper blade from the wiper arm.

4. Remove the wiper blade.

Note: Make sure that the wiper blade locks into place.

5. Install in the reverse order.

    See also:

    Engine coolant check
    Checking the coolant level WARNING: Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. CAUTION ...

    Specifications
    General System type: 1.1 litre OHV engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical contact breaker and coil 1.1 litre CVH engines up to 1986 . . . . . ...

    Telephone controls
    Remote control Voice, accept and reject button Voice button 1 Accept and reject button 2 The VOICE button is used to activate or switch off the Voice control. On vehicles with an accept and re ...