Hazard warning flashers

Note: Depending on applicable laws and regulations in the country for which your vehicle was originally built, the hazard warning flashers may flash if you brake heavily.

For item location: See Quick start.


For item location: See Quick start.

    See also:

    Tie-rod end - removal and refitting
    Note: A balljoint separator tool will be required for this operation. Removal 1 Loosen the relevant front roadwheel nuts, apply the handbrake, jack up the front of the vehicle and support on axle ...

    Rear seat catch - removal and refitting
    Saloon models 1 Working in the luggage compartment, release the seat catch by pulling the release knob, or if the cable is broken, use a screwdriver to release the catch itself. 2 Fold the backre ...

    Steering gear rubber gaiter - renewal
    1 Remove the tie-rod end. 2 Unscrew and remove the tie-rod end locknut from the tie-rod. 3 Remove the clips and slide the gaiter from the tie-rod and steering gear. 4 Slide the new gaiter over th ...