Changing a bulb

WARNINGS:
Switch the lights and the ignition off.

Let the bulb cool down before removing it.

Have Xenon bulbs changed by a trained technician. There is a risk of electric shock.

CAUTIONS:
Do not touch the glass of the bulb.

Only fit bulbs of the correct specification. See Bulb
specification chart.

Headlamp

Direction indicator

1. Remove the headlamp. See Removing a headlamp.

2. Turn the bulb holder anti-clockwise


2. Turn the bulb holder anti-clockwise and remove it.

3. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it.

Headlamp main and dipped beam

Note: Remove the covers to gain access to the bulbs.

1. Remove the headlamp. See Removing a headlamp.

2. Turn the bulb holder anti-clockwise


2. Turn the bulb holder anti-clockwise and remove it.

3. Remove the bulb.

Side lamp

1. Remove the headlamp. See Removing a headlamp.

2. Remove the cover.


2. Remove the cover.

3. Pull the bulb holder and remove it.

Remove the bulb.

Side repeaters

1. Remove the cover.


1. Remove the cover.

2. Release the retaining clip.


2. Release the retaining clip.

3. Remove the bulb and bulb holder.

Remove the bulb.

Approach lamp

Note: Position the mirror glass as far


Note: Position the mirror glass as far inwards as possible.

1. Insert a screwdriver into the gap between the mirror housing and the mirror glass and release the metal retaining clip.

2. Remove the lamp.


2. Remove the lamp.

3. Remove the bulb.

Front fog lamps

Note: You cannot separate the fog lamp


Note: You cannot separate the fog lamp bulb from the bulb holder.

1. Using a suitable implement, remove the cover.

2. Remove the screws.

3. Remove the lamp.

4. Disconnect the electrical connector.


4. Disconnect the electrical connector.

5. Turn the bulb holder anti-clockwise and remove it.

Rear fog lamps

1. Carefully remove the lamp.


1. Carefully remove the lamp.

2. Turn the bulb holder anti-clockwise and remove it.

3. Remove the bulb.

Rear lamps

Direction indicator and reverse lamp

1. Remove the trim panel.


1. Remove the trim panel.

Direction indicator A
Direction indicator A
Reverse lamp B

2. Disconnect the electrical connector.

3. Turn the bulb holder anti-clockwise and remove it.

4. Remove the bulb.

Tail lamp and brake lamp

1. Remove the trim panel.


1. Remove the trim panel.

2. Remove the nut.


2. Remove the nut.

3. Gently press the bulb into the bulb


3. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it.

Central high mounted brake lamp

Note: The LED board is not a serviceable item, please consult your dealer if this fails.

Number plate lamp

1. Carefully release the spring clip.


1. Carefully release the spring clip.

2. Remove the lamp.

3. Remove the bulb.

Interior lamp

Vehicles without interior sensors

1. Carefully prise out the lamp.


1. Carefully prise out the lamp.

2. Turn the bulb holder anti-clockwise and remove it.

3. Remove the bulb.

Vehicles with interior sensors

1. Carefully prise out the lens.


1. Carefully prise out the lens.

2. Remove the lens.

3. Remove the bulb.

Reading lamps

Vehicles without interior sensors

1. Carefully prise out the lamp.


1. Carefully prise out the lamp.

2. Turn the bulb holder anti-clockwise and remove it.

3. Remove the bulb.

Vehicles with interior sensors

1. Carefully prise out the lamp.


1. Carefully prise out the lamp.

2. Turn the bulb holder anti-clockwise and remove it.

3. Remove the bulb.


3. Remove the bulb.

Vanity mirror lamp

1. Carefully prise out the lamp.


1. Carefully prise out the lamp.

2. Remove the bulb.

Luggage compartment lamp

1. Carefully prise out the lamp.


1. Carefully prise out the lamp.

2. Remove the bulb.

    See also:

    CVH engines
    The 1.6 litre CVH engine was introduced in September 1991, to replace the 1.6 litre SOHC engine used previously in the Sierra range. The engine is broadly similar to the 1.8 litre (R2A type) CVH e ...

    Specifications
    System type SOHC models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pressurised, with belt-driven coolant pump, crossflow radiator, thermo-viscous f ...

    Chevrolet SUV's
    Chevrolet got its start in 1911. After William C. Durant had been ousted from General Motors, he joined forces with Swiss-born racecar driver Louis Chevrolet to found the Chevrolet Motor Car Company ...