General information

WARNING:
Do not operate the information display controls when the vehicle moving.

Note: The information display will remain on for several minutes after you switch off the ignition.

Various systems on your vehicle can be controlled using the multi-function lever on the steering column. Corresponding information is displayed in the information display.

For detailed instructions on navigation, refer to the appropriate manual.

Controls
Controls

Use the rotary control:

Type 2 and 3

Х to scroll through the trip computer displays.

Х to scroll through and highlight the options within a menu.

Note: To scroll automatically, hold the rotary control in the upward or downward position.

Press the SET/RESET button to:


Press the SET/RESET button to: Х enter the main menu from the trip computer displays.

Х enter a sub-menu.

Х exit a menu.

Х choose and confirm a setting.

Note: If the chimes are activated, a short tone will sound each time the button is pressed.

Menu structure


Personalised settingsPersonalised settings


    See also:

    Cold start valve - removal and refitting
    Note: Refer to the precautions at the end of Section 1 before proceeding. K-Jetronic system Removal 1 Disconnect the battery earth lead. 2 Detach the electrical wiring multi-plug from the valve ...

    Rollover bars
    Rollover bars WARNINGS: Keep the areas around the rollover bar covers free from obstruction. Do not attempt to reset the rollover protection system if it deploys. The rollover protection syste ...

    Sun blinds
    Panoramic roof The roof blind is in two sections. Pull the handle from the front or rear of the panoramic roof and fully extend the required section. To open the blind, slightly pull the handle ...