Information messages


Press SET/RESET to acknowledge and


Press SET/RESET to acknowledge and remove some messages from the information display. Other messages will be removed automatically after a short time.

With instrument cluster type 2 and 3, certain messages need to be confirmed before you can access the menus.

Message indicator
Message indicator

The message indicator illuminates to supplement some messages. It will be red or amber depending on the severity of the message and will remain on until the cause of the message has been rectified.

Message symbols

See Owner’s handbook.
See Owner’s handbook.

Have the system checked at the next service.
Have the system checked at the next service.

Have the system checked as soon as possible.
Have the system checked as soon as possible.

Stop your vehicle as soon as it is safe to do so.
Stop your vehicle as soon as it is safe to do so.

Viewing current messages

Type 2 and 3

1. Scroll to this display using the rotary control and press the SET/RESET button.

2. Turn the rotary control to scroll through the available messages.

3. Press SET/RESET to acknowledge the message and exit the menu.

Doors open

Keyless system


Keyless system

LightingLighting


Lighting

Maintenance


Maintenance

Power steeringPower steering


Power steering

Transmission


Transmission

Stability control (ESP)Stability control (ESP)


Stability control (ESP)

Climate control


    See also:

    ESC Hybrid system components - removal and refitting
    Note: Procedures for removal and refitting of the ignition system components and electronic module are given elsewhere in the relevant Sections of this Chapter. 1 Disconnect the battery negative l ...

    Bumper trim moulding - renewal
    New bumpers are supplied without the trim moulding fitted. Special primer and adhesive tape are specified by the manufacturer to retain the moulding: it is suggested that a Ford dealer is consulte ...

    Rear under floor storage
    WARNING: When you are using a child seat with a support leg, make sure that you install the foam spacer correctly inside the storage compartment and that you position the cover correctly. Rear ...