Cigar lighter
CAUTIONS:
If you use the socket when the
engine is not running, the battery
may discharge.
Do not hold the cigar lighter element pressed in.
Note: Switch the ignition on to use the cigar lighter. You can also use it for up to 30 minutes after you have switched the ignition off.
Note: You can use the socket to power 12 volt appliances that have a maximum current rating of 15 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets.

Press the element in to use the cigar lighter. It will pop out automatically.
See also:
Fuel cut-off (inertia) switch - removal and refitting
The procedure is as described in Part C of
this Chapter for models with the CFI system. ...
Intercooler - removal and refitting
1985 models
Removal
1 Disconnect the battery negative lead.
2 Remove the air cleaner as described in
Section 2.
3 Remove the intercooler upper and lower air
hoses (see illustration).
22.3 Int ...
Booster cushions
WARNINGS:
Do not install a booster seat or a
booster cushion with only the lap
strap of the seat belt.
Do not install a booster seat or a
booster cushion with a seat belt that
is slack or twiste ...
