Switching off the engine

Vehicles with a turbocharger

CAUTION:
Do not switch the engine off when it is running at high speed. If you do, the turbocharger will continue running after the engine oil pressure has dropped to zero. This will lead to premature turbocharger bearing wear.

Release the accelerator pedal. Wait until the engine has reached idle speed and then switch it off.

    See also:

    Fuel injectors - removal and refitting
    Caution: Refer to the precautions in Section 1 before proceeding. Note: A tachometer and an exhaust gas analyser will be required to check the idle mixture on completion. New seals and retaining ...

    Bluetooth setup
    Before you can use your telephone with your vehicle it must be bonded to the vehicle telephone system. Handling of phones Up to six Bluetooth devices can be bonded to the vehicle system. Note: I ...

    Distributor cap and rotor arm (OHC models) - removal and refitting
    SOHC models 1 Disconnect the battery negative lead. 2 Where applicable, unclip the screening can from the top of the distributor and disconnect the earth strap (see illustration). 13.2 Unclippi ...