Towing the vehicle on four wheels - AWD

Switch the ignition on when your vehicle is being towed. The steering lock will engage and the direction indicators and brake lamps will not work if you do not.

The brake servo and the power steering pump do not operate unless the engine is running. Press the brake pedal harder and allow for increased stopping distances and heavier steering.

Too much tension in the tow rope could cause damage to your vehicle or the vehicle that is towing.

Do not use a rigid tow bar on the front towing eye.

In the event of a breakdown or a mechanical failure of the transmission your vehicle must be recovered with either ALL wheels on the ground or transported with ALL wheels off the ground.

Drive off slowly and smoothly without jerking the vehicle that is towing.

    See also:

    Steering column adjuster - dismantling and reassembly
    Note: A new adjuster locknut and washer must be used on reassembly. Dismantling 1 To dismantle the adjuster assembly, proceed as follows. 2 Remove the locknut and washer securing the adjuster th ...

    Throttle pedal - removal and refitting
    Refer to Chapter 4 Part A, Section 11. ...

    Important child restraint precautions
    WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be purchased separately from the vehicle. ...