Using the telephone - Vehicles With: Navigation System

This chapter describes the phone functions of the Navigation System.

Note: Refer to your Navigation System guide for details of the controls.

An active phone must be present.

Even if connected to the Navigation System, your phone can still be used in the usual way.

Making a call

Dialling a number

Phone numbers can be dialled using voice control. See Voice control.

Ending a call

Calls can be ended by pressing either the END button, the MODE button on the remote switch or the ON/OFF button on the navigation system.

Redialling a number

1. Press the PHONE button on the unit.

2. Select REDIAL.

Receiving an incoming call

Accepting an incoming call

Incoming calls can be accepted by pressing either the call accept button, the MODE button on the remote control, the PHONE button on the unit or by using the ACCEPT option in the menu.

Rejecting an incoming call

Incoming calls can be rejected by pressing either the call reject button, the CD or AM/FM buttons on the unit, or by using the REJECT option in the menu.

Receiving a second incoming call

Note: The second incoming call function must be activated in your phone.

If there is an incoming call, whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call.

Accepting a second incoming call

Second incoming calls can be accepted by pressing either the call accept button, the MODE button on the remote control, the PHONE button on the unit or by using the ACCEPT option in the menu.

Note: This will cancel the ongoing call.

Rejecting a second incoming call

Second incoming calls can be rejected by pressing either the call reject button, or one of the following buttons on the unit: CD, AM/FM.

Muting the microphone

During a call, it is possible to mute the microphone. Whilst muted, confirmation will appear in the display.

DVD navigation units

Press the mute button (symbol of a microphone with a line through it). Press the button once again to turn this function off.

CD navigation units

Press the microphone mute button. Press the button once again to turn this function off.

Changing the active phone

Note: Phones must be bonded to the system before they can be made active.

Note: After bonding a phone to the system, this becomes the active phone.

1. Press the PHONE button on the unit.

2. Using the BT SETTINGS option in the menu, select the active phone from the list.

Debonding a bonded phone

A bonded phone can be deleted from the system at any time, unless a phone call is in progress.

1. Press the PHONE button on the unit.

2. Select the BT SETTINGS option in the menu.

3. Select the DEBOND option in the menu.

4. Select the phone from the list.

    See also:

    Exterior
    The Fusion was the first Ford model to feature the chrome three-bar grille that has since appeared on other models. There are projector-beam headlights and taillights that are a cross between conv ...

    Running-in
    Tyres WARNING: New tyres need to be run-in for approximately 500 kilometres (300 miles). During this time, you may experience different driving characteristics. Brakes and clutch WARNING: Avo ...

    Cigar lighter
    CAUTIONS: If you use the socket when the engine is not running, the battery may discharge. Do not hold the cigar lighter element pressed in. Note: Switch the ignition on to use the cigar lighte ...