Connectivity

See also:

Oil pump drive chain and sprockets - examination and renovation
1 Examine all the teeth on the sprockets. If the teeth are “hooked” in appearance, renew the sprockets. 2 Examine the chain tensioner for wear, and renew it if necessary. 3 Examine the chain for ...

Fuel pressure regulator - removal and refitting
Note: Refer to the precautions at the end of Section 1 before proceeding. Removal 1 The fuel pressure regulator is only used on KE-Jetronic systems and is located behind the fuel distributor (see ...

Checking the wiper blades
Checking the wiper blades Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blade lips with water applied with a soft sponge. ...