Navigation introduction

See also:

Hydraulic unit pressure switch (ABS) - removal and refitting
Note: To remove the pressure switch from the hydraulic unit in situ, Ford tool No 12-008 or a locally made equivalent will be required. The switch may be removed without special tools after removi ...

Glove compartment - removal and refitting
Pre-1986 models Removal 1 Open the glovebox lid and extract the screws which hold the glovebox to the facia. 2 Remove the latch (two screws). 3 Remove the single screw inside the top of the glov ...

Battery - removal and refitting
Removal 1 The battery is located in the engine compartment on the left-hand side of the bulkhead. 2 Disconnect the leads at the negative (earth) terminal by unscrewing the retaining nut and remo ...