Road Safety

WARNINGS:
The system provides you with information designed to help you reach your destination quickly and safely.

For reasons of safety, the driver should only program the system when the vehicle is stationary.

The system provides no assistance with respect to stop signs, traffic lights, areas under construction or other important safety information.

Do not use the system until you have familiarised yourself with its operation.

Only view the system display when driving conditions permit.

Safety information

Read and follow all stated safety precautions. Failure to do so may increase your risk of collision and personal injury.

Ford Motor Company shall not be liable for any damages of any type arising from failure to follow these guidelines.

If detailed viewing of route instructions is necessary, pull off the road when it is safe to do so and park your vehicle.

Do not use the navigation system to locate emergency services.

To use the system as effectively and safely as possible, always use the latest navigation information. Your dealer will be able to assist with this.

    See also:

    Engine dismantling, examination, renovation and reassembly - general information
    Dismantling 1 Refer to Chapter 2, Part A, Section 18, paragraphs 1 to 8 inclusive. 2 A suitable selection of splined and Torx sockets will be required to remove many of the bolts when dismantling ...

    Central Fuel Injection (CFI) unit - removal and refitting
    Note: Refer to the precautions at the end of Section 1 before proceeding. Removal 1 Disconnect the battery negative lead. 2 Remove the air cleaner assembly. 3 Depressurise the fuel system as desc ...

    Temperature A B C
    The temperature grades are A (the highest), B and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a speci ...