Electronic compass (if equipped)

The compass heading is displayed in the center stack display.

The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broadcast antenna. Magnetic or metallic objects placed in, on or near the vehicle may also affect compass accuracy.

Usually, when something affects the compass readings, the compass will correct itself after a few days of operating your vehicle in normal conditions. If the compass still appears to be inaccurate, a manual calibration may be necessary. Refer to Compass calibration adjustment.

Most geographic areas (zones) have a magnetic north compass point that varies slightly from the northerly direction on maps. This variation is four degrees between adjacent zones and will become noticeable as the vehicle crosses multiple zones. A correct zone setting will eliminate this error. Refer to Compass zone adjustment.

See also:

Suspension and steering check (Every 6000 miles or 6 months)
Front suspension and steering check 1 Raise the front of the vehicle, and securely support it on axle stands (see “Jacking and Vehicle Support”). 2 Visually inspect the balljoint dust covers and ...

Auxiliary heater
Diesel auxiliary heater (depending on country) The diesel auxiliary heater (PTC electrical heater) aids in warming the engine and the interior compartment on vehicles with diesel engines. It is s ...

Thermostat - removal, testing and refitting
OHV engines Note: A new gasket must be used on refitting. Removal 1 Drain the cooling system as described in Chapter 1. 2 Slacken the clips and disconnect the hoses at the thermostat housing (se ...