Steering wheel controls (if equipped)

Radio control features

VOL + (Volume): Press to increase the volume.

VOL – (Volume): Press to decrease the volume.

the previous/next radio station (Seek): Press to select
the previous/next radio station preset, CD track or satellite radio channel (if equipped) depending on which media mode you are in.

MEDIA: Press repeatedly to scroll through available audio modes.

Navigation system hands-free


Navigation system hands-free control features (if equipped)

Press and hold brieflycontrol
briefly until the voice on icon appears
on the navigation display to use the voice command feature.

Press  to complete a voice


Press command. to complete a voice
command.

For further information on the navigation system, refer to the Navigation System supplement.

SYNC system hands-free control feature (if equipped)

Press voice briefly to use the
voice command feature. You will hear a tone and LISTENING will appear in the radio display. Press and hold to exit voice command.


Press  to activate phone


Press mode or to activate phone
mode or answer a phone call. Press and hold phone to end a call or exit
phone mode.

Press various menus and selections. Press to scroll through
various menus and selections. Press OK to confirm your selection.

For further information on the SYNC system, refer to the SYNC supplement.

Navigation system/SYNC hands-free control features (if equipped)

Pressthe control briefly until
the voice Navigation display to use the voice icon appears on the
Navigation display to use the voice command feature.

Press  to activate phone


Press mode or to activate phone
mode or answer a phone call. Press and hold end to exit phone mode or
end a call.

For further information on the Navigation system/SYNC system, refer to the Navigation System and SYNC supplements.

    See also:

    Fastening the seat belts
    Fastening the seat belts WARNING: Insert the tongue into the buckle until a distinct click is heard, otherwise the seat belt will not be locked correctly. Pull the belt out steadily. It may lo ...

    Cylinder head - dismantling and reassembly
    Note: A valve spring compressor will be required during this procedure. New valve stem oil seals should be used on reassembly. Dismantling 1 With the cylinder head removed, remove the camshaft. ...

    Carburettor (Pierburg 2V type) - fast idle speed adjustment
    1 Check the idle speed and mixture adjustment. The idle speed must be correct before attempting to check or adjust the fast idle speed. 2 With the engine at normal operating temperature, and a ta ...