Universal garage door opener (if equipped)

Car2U Home Automation System (if equipped)

The Car2U Home Automation System is a universal transmitter located in the drivers visor that includes two primary features a garage door opener and a platform for remote activation of devices within the home. The Car2U systems garage door opener function replaces the common hand-held garage door opener with a three-button transmitter that is integrated into the interior of your vehicle. After being programmed for garage doors, the Car2U system transmitter can be programmed to operate security devices and home lighting systems.

WARNING: Make sure that people and objects are clear of the


garage door or security device you are programming. Do not WARNING: Make sure that people and objects are clear of the
garage door or security device you are programming. Do not program the Car2U system with the vehicle in the garage.

Do not use the Car2U system with any garage door opener that lacks safety stop and reverse features as required by U.S. Federal Safety Standards (this includes any garage door opener manufactured before April 1, 1982).

Be sure to keep the original remote control transmitter for use in other vehicles as well as for future Car2U system programming. It is also recommended that upon the sale or lease termination of the vehicle, the programmed Car2U system buttons should be erased for security reasons. Refer to Erasing the Car2U Home Automation System buttons later in this section.

Read the instructions completely before attempting to program the Car2U system. Because of the steps involved, it may be helpful to have another person assist you in programming the transmitter.

Additional Car2U system information can be found on-line at www.learcar2U.com or by calling the toll-free Car2U system help line at 1-866-572-2728.

See also:

Steering column - removal and refitting
Removal 1 Set the front wheels in the straight-ahead position. 2 Disconnect the battery negative lead. 3 Remove the drivers side lower facia trim panels. 4 Remove the screws and withdraw the s ...

Bonnet - removal and refitting
Removal 1 Open the bonnet and support it on its stay. 2 Disconnect the screen washer pipe on the underside of the bonnet lid (see illustration). 7.2 Disconnecting the windscreen washer fluid pip ...

Interior lamps
Courtesy lamp Off A Door contact B On C If you set the switch to position B, the courtesy lamp will come on when you unlock or open a door or the luggage compartment lid. If you leave a door ...