Cargo shade (if equipped)

If your vehicle has a cargo shade, you can use it to cover items in the cargo area of your vehicle.

To install the shade:

• Insert the ends of the cargo shade into the mounting features located behind the rear seat on the rear trim panels.

To operate the shade:


To operate the shade:

1. Grasp the rear edge of the cargo shade and pull rearward.

2. Secure both ends of the support rod into the retention slots located on the rear quarter trim panels.

mounting features. The cover may cause injury in a sudden stop WARNING: Ensure that the posts are properly latched in
mounting features. The cover may cause injury in a sudden stop or accident if it is not securely installed.

WARNING: Do not place any objects on the cargo area shade.


They may obstruct your vision or strike occupants of vehicle in the case of a sudden stop or collision.

    See also:

    Valve block (ABS) - removal and refitting
    Caution: Refer to the precautions in Section 1. Removal 1 Disconnect the battery negative lead. 2 Depressurise the hydraulic system by pumping the brake pedal at least 20 times, or until it beco ...

    Child seats
    WARNINGS: Secure children that are less than 150 centimetres tall or less than 12 years of age in a suitable, approved child restraint, in the rear seat. Original text according to ECE R94.01: ...

    Radiator grille panel - removal and refitting
    Models up to 1987 1 With the bonnet raised, remove the four grille panel securing screws from the top of the front panel. 2 Lift the grille panel from its lower mounting bushes, and withdraw it f ...