Clear MyKey

To reset all MyKeys as admin keys do the following:

1. Turn the vehicle on using the admin key.

2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed.

3. Press and release the RESET button. HOLD RESET TO CONFIRM CLEAR is displayed.

4. Press and hold the RESET button for two seconds until ALL MYKEYS CLEARED is displayed.

    See also:

    Fuel tank - removal and refitting
    The procedures are the same as described in Part A of this Chapter for carburettor engines, but in addition disconnect the fuel tank-to-fuel pump hose from the rear face of the tank. ...

    Fuel cut-off switch
    Vehicles with a Duratec engine The fuel supply may be cut off as a result of an accident or sudden vibrations (e.g. collision when parking). The switch is located in the side panel in front of ...

    Locking and unlocking
    Central locking You can only centrally lock the doors if they are all closed. Note: The driver’s door can be unlocked with the key. This needs to be used if the remote control or keyless entry is ...