Front safety belt usage sensors

The front safety belt usage sensors detect whether or not the driver and front outboard passenger safety belts are fastened. This information allows your Personal Safety System to tailor the airbag deployment and safety belt pretensioner activation depending upon safety belt usage.

Refer to Safety restraints section in this chapter.

    See also:

    Hydraulic unit accumulator (ABS) - removal and refitting
    Note: A new O-ring must be used between the accumulator and the hydraulic unit on refitting. Caution: Refer to the precautions in Section 1. Removal 1 Disconnect the battery negative lead. 2 De ...

    Exhaust gas oxygen (HEGO) sensor (2.0 litre DOHC/1.6 & 1.8 litre (R6A type) CVH) - removal and refitting
    Note: Do not touch the tip of the HEGO sensor as this will drastically shorten its service life. Note: A new sealing ring should be used on refitting. Removal 1 Ensure that the engine and the ex ...

    Starting a petrol engine
    Note: You can only operate the starter for a maximum of 30 seconds at a time. Cold or hot engine All vehicles CAUTION: When the temperature is below -20ºC (-4ºF), switch the ignition o ...