Safety belt height adjustment

Your vehicle has safety belt height adjustments at the front outboard seating positions. Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder.

To adjust the shoulder belt height, squeeze and hold the buttons on the side and slide the height adjuster up or down. Release the buttons and pull down on the height adjuster to make sure it is locked in place.

WARNING: Position the safety belt height adjusters so that the


belt rests across the middle of your shoulder. Failure to adjust WARNING: Position the safety belt height adjusters so that the
belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the safety belt and increase the risk of injury in a collision.

    See also:

    Towing the vehicle on four wheels
    All vehicles WARNINGS: Switch the ignition on when your vehicle is being towed. The steering lock will engage and the direction indicators and brake lamps will not work if you do not. The brake ...

    Fuel injector ballast resistor (1.6 litre CVH) - removal and refitting
    1 The ballast resistor is located on the righthand side of the engine compartment, and is only fitted to 1.6 litre engines (see illustration). 17.1 Fuel injector ballast resistor location (arrow ...

    Principle of operation
    The engine immobiliser is a theft protection system that prevents someone from starting the engine with an incorrectly coded key. ...