Additional information contained on the tire sidewall for LT typetires

LT type tires have some additional information beyond those of P type tires; these differences are described below.

Note: Tire Quality Grades do not apply to this type of tire.

1. LT: Indicates a tire, designated by the Tire and Rim Association (T&RA), that is intended for service on light trucks.

2. Load Range/Load Inflation Limits: Indicates the tires load-carrying capabilities and its inflation limits.

3. Maximum Load Dual lb (kg) at psi (kPa) cold: Indicates the


3. Maximum Load Dual lb (kg) at psi (kPa) cold: Indicates the maximum load and tire pressure when the tire is used as a dual; defined as four tires on the rear axle (a total of six or more tires on the vehicle).

4. Maximum Load Single lb (kg) at psi (kPa) cold: Indicates the maximum load and tire pressure when the tire is used as a single; defined as two tires (total) on the rear axle.

    See also:

    Power distribution box
    The power distribution box is located in the engine compartment. Refer to the Identifying components in the engine compartment section of the Maintenance and Specifications chapter for the location. ...

    Front brake disc pad check (Every 6000 miles or 6 months)
    1 Place a mirror between the roadwheel and the caliper and check the thickness of the friction material of the disc pads (see illustration). If the material has worn down to the specified minimum ...

    Seat belt height adjustment
    Note: Lifting the slider slightly while pressing the locking button makes it easier to release the locking mechanism. To raise or lower, press the locking button on the adjuster and move as nece ...