Disabling trailer sway control

Trailer sway control can be disabled during any key cycle. Pressing and holding the stability control button for more than five seconds will disable the trailer sway control feature and the stability control light will flash momentarily and then illuminate solid for that ignition cycle. Trailer sway control can be re-enabled by momentarily pressing the stability control button. Trailer sway control will also be re-enabled at each new key cycle.

loss of vehicle control, serious injury, or death. Ford does not WARNING: Turning off trailer sway control increases the risk of
loss of vehicle control, serious injury, or death. Ford does not recommend disabling this feature except in situations where speed reduction may be detrimental (e.g., hill climbing), the driver has significant trailer towing experience, and can control trailer sway and maintain safe operation.

    See also:

    Timing chain and sprockets - removal and refitting
    Note: Refer to the warning at the beginning of Section 5 before proceeding. A suitable puller will be required to remove the crankshaft pulley. A new crankshaft pulley bolt, a new timing chain ten ...

    Connecting an external device
    WARNING: Make sure the external device is securely mounted within the vehicle, and that trailing connections do not obstruct any of the driving controls. External devices may be connected using ...

    Changing the wiper blades
    Windscreen wiper blades CAUTIONS: Set the windscreen wipers in the service position to change the wiper blades. You can use the service position in winter to provide easier access to the wiper ...